Set of 4 Rods for Bending Copper Tubes 1/4″–5/8″, 4 m
Set of 4 Rods for Bending Copper and Aluminium Tubes BLUE is an installation tool designed for shaping pipes used in air conditioning, refrigeration, and heat pump systems. The set includes four flexible inserts, each 4 m long, suitable for tubes with outer diameters of 1/4″, 3/8″, 1/2″, and 5/8″.
The rods are placed inside the tube before bending begins. The insert supports the tube walls during the formation of the bend, helping to reduce the risk of kinking, crushing, and excessive flattening of the pipe. Each size is marked with a different colour to facilitate the selection of the appropriate tool, and the possibility of multiple uses makes the set a practical addition for HVAC/R installers and service technicians.
Main Advantages
- 4 Sizes in One Set – allows working with tubes of diameters 1/4″, 3/8″, 1/2″, and 5/8″.
- Length of Each Rod 4 m – enables forming bends on longer sections of tubes.
- Reduces Risk of Kinks and Crushes – inserts support the inner walls of the tube during bending.
- Applicable to Copper and Aluminium Tubes – set for installation work in refrigeration and air conditioning.
- Colour-Coded Diameter Markings – facilitates quick recognition of the appropriate rod size.
- Flexible Insert Construction – allows them to be inserted into tubes and to create appropriately selected bends.
- Reusable – rods can be reused after completing the work and removing them from the tube.
Technical Specification
Parameter | Value |
|---|
Product Type | Set of Rods/Inserts for Tube Bending |
Number of Rods | 4 pcs |
Length of Each Rod | 4 m |
Total Length of Rods | 16 m |
Supported Tube Diameters | 1/4″, 3/8″, 1/2″, 5/8″ |
Red Rod | For 1/4″ Tube – Rod Diameter 3.8 mm |
Green Rod | For 3/8″ Tube – Rod Diameter 6.8 mm |
Yellow Rod | For 1/2″ Tube – Rod Diameter 9.5 mm |
Blue Rod | For 5/8″ Tube – Rod Diameter 12.2 mm |
Material of Processed Tubes | Copper, Aluminium |
Type of Processing | Tube Bending |
Application Method | Insert Placed Inside the Tube |
Reusable | Yes |
Intended Use | Air Conditioning, Refrigeration, Heat Pump Installations |
Application
Rods for bending copper and aluminium tubes are intended for installation work requiring the shaping of pipes without excessive deformation.
The set can be used during:
- Installation of split and multisplit air conditioning systems.
- Laying copper tubes in refrigeration installations.
- Installation of refrigeration pipes in split heat pump systems.
- Forming bends on sections of copper and aluminium tubes.
- Installation and service work where proper shaping of the pipe route is required.
Before starting bending, select the insert according to the diameter and internal dimensions of the tube, and consider its material, wall thickness, material condition, and allowable bending radius.
How to Use Tube Bending Rods?
- Select the rod appropriate for the diameter of the tube being processed.
- Insert the insert into the interior of the tube on the section intended for bending.
- Gradually form the bend, maintaining the allowable bending radius.
- After forming, carefully remove the rod from the tube.
- Before the next use, check the condition of the insert and remove any contaminants.
The rods help reduce deformations but do not completely eliminate the risk of tube damage with improper bending technique.
Set Contents
- 1 × Red Rod, 4 m – for 1/4″ tubes.
- 1 × Green Rod, 4 m – for 3/8″ tubes.
- 1 × Yellow Rod, 4 m – for 1/2″ tubes.
- 1 × Blue Rod, 4 m – for 5/8″ tubes.
In total, the set includes 4 rods with a total length of 16 m.
Why Choose This Set?
The BLUE rod set combines four popular sizes used in air conditioning and refrigeration installations. With internal inserts, the installer can shape tubes, reducing the risk of kinking or flattening. The 4 m length, colour-coded markings, and reusability make the set a practical addition to HVAC/R installation equipment.