Condensing Unit BOYARD BYGF-030-QXD-SEDP-10 – 3 HP, Single-Phase, MBP/LBP
The BOYARD BYGF-030-QXD-SEDP-10 condensing unit is an external refrigeration unit with a compressor power of 3 HP, designed for professional refrigeration and freezing installations. The device uses the TXSD456KS compressor and operates with single-phase power supply 220 V / 50 Hz.
The unit provides a cooling capacity from 1365 W at an evaporation temperature of –40°C to 5440 W at –5°C, according to catalogue test conditions for refrigerant R404A.
The model is equipped with a 2.5 l liquid receiver, a condenser fan with a power of 65 W, a filter drier, sight glass, check valve, and high and low pressure gauges.
An electronic control board is responsible for the unit's operation control functions and protection of its basic components. The device is intended for applications where higher cooling capacity is required, and the electrical installation is suitably prepared for single-phase power supply.
Main Advantages
- Compressor power of 3 HP and model TXSD456KS.
- Cooling capacity up to 5440 W at –5°C.
- Single-phase power supply 220 V / 50 Hz.
- Evaporation temperature range from –40°C to –5°C.
- Ambient temperature from –15°C to +46°C.
- 2.5 l liquid receiver and 65 W condenser fan.
- High and low pressure control system.
- Optional oil separator, solenoid valve, and crankcase heater.
Technical Specification
Parameter | Value |
|---|
Model | BYGF-030-QXD-SEDP-10 |
Device Type | External Condensing Unit MBP/LBP |
Operating Frequency | Constant, 50 Hz |
Compressor Power | 3 HP |
Compressor Model | TXSD456KS |
Power Supply | 1~ 220 V / 50 Hz |
Refrigerant | R404A / R448A / R449A / R454C / R455A |
Maximum Refrigerant Amount | 3.5 kg |
Evaporation Temperature | –40 to –5°C |
Ambient Temperature | –15 to +46°C |
Fan Motor | 1 × 65 W |
Pressure Switch / Sensor | Membrane Pressure Switches HP and LP |
Liquid Receiver | 2.5 l |
Sight Glass | 3/8″ |
Pressure Gauges | High and Low Pressure |
Filter Drier | 083S |
Check Valve | SR-10 |
Oil Separator | Optional, BLR/A-W 55833 |
Solenoid Valve | Optional, 3/8″ |
Crankcase Heater | Optional, 35 W |
AC Contactor | 25/01 |
Gas Connection | 5/8″ (15.88 mm), OD |
Liquid Connection | 3/8″ (9.53 mm), OD |
Device Dimensions | 1015 × 420 × 850 mm |
Installation Dimensions | 580 × 385 mm |
Cooling Capacity – R404A
Evaporation Temperature | Cooling Capacity |
|---|
–40°C | 1365 W |
–35°C | 1625 W |
–30°C | 2060 W |
–25°C | 2485 W |
–20°C | 3100 W |
–15°C | 3550 W |
–10°C | 4525 W |
–5°C | 5440 W |
Conditions: R404A, ambient temperature +32°C, subcooling 0°C, GB/T 21363-2018.
Application
The BOYARD 3 HP single-phase condensing unit can be used in medium-sized cold rooms, refrigeration installations in shops and gastronomy, storage devices, and commercial freezing installations.
It is particularly worth considering in installations where single-phase power supply is required, and the calculated cooling capacity demand matches the characteristics of the TXSD456KS compressor.
Why Choose This Unit?
The BOYARD BYGF-030-QXD-SEDP-10 is a model offering the highest cooling capacity among the presented single-phase units of this series.
The device combines a 3 HP compressor, a 2.5 l liquid receiver, basic refrigeration valves and fittings, and an electronic control system. The use of single-phase power supply is a significant argument for investments where a three-phase circuit is not planned.
However, it is necessary to verify the required starting current, electrical protections, and permissible load of the installation.
Interested in another version of the unit? Check our unit at the link: https://blueref.pl/produkty/agregat-skraplajacy-boyard-bygf-030