Anti-Vibration Bases SXH450-B 450 mm – Set of 2
Anti-Vibration Bases SXH450-B BLUEREF is a set of two elongated rubber supports, 450 mm in length, designed for stable mounting of air conditioners, heat pumps, and refrigeration units. Made from vulcanised SBR rubber, equipped with aluminium mounting rails 410 mm long, they help reduce the transmission of vibrations to the ground. The permissible load for the entire set is 280 kg.
Rubber Bases SXH450-B for Air Conditioners and Heat Pumps
Rubber Bases SXH450-B from the SXH series offer a mounting solution that combines a slim design with the durability needed for HVAC/R equipment installation. The elongated shape with dimensions of 450 × 130 × 95 mm allows for the placement of device mounting points along two independent supports.
The base body is made from recycled vulcanised SBR rubber compound, produced from sorted granulate. The material provides anti-vibration properties, helping to reduce the transmission of vibrations generated during the operation of compressors and fans. The declared resistance to UV radiation and weather conditions allows the bases to be used in suitably prepared outdoor installations.
Each base features an integrated 410 mm extruded aluminium channel, allowing for the placement of mounts along the rail and facilitating device installation and removal.
An additional advantage of the design is holes for securing the bases to the ground and water drainage holes. Included spirit levels assist in setting up the supports, and a set of four mounting screws allows for the preparation of device mounting points.
Main Advantages
- Load capacity up to 280 kg per set – two bases designed to support appropriately selected HVAC/R equipment.
- Anti-vibration SBR rubber – helps reduce the transmission of vibrations from the device to the support structure.
- 410 mm aluminium mounting rail – allows for the adjustment of the position of mounting elements along the support.
- Ability to secure to the ground – special holes allow for the use of appropriate mechanical connections.
- Water drainage holes – facilitate water runoff from under the base.
- Set with spirit levels and screws – equipment supporting the preparation and proper setup of supports.
Technical Specification
Parameter | Value |
|---|
Product Type | Anti-vibration rubber base |
Intended Use | Air conditioners, heat pumps, refrigeration units, and HVAC installations |
Construction Type | Elongated, with aluminium mounting rail |
Base Material | Recycled vulcanised SBR rubber |
Mounting Rail Material | Extruded aluminium |
Colour | Black |
Length | 450 mm |
Width | 130 mm |
Height | 95 mm |
Aluminium Rail Length | 410 mm |
Permissible Set Load | 280 kg |
Operating Temperature Range | From –40°C to +80°C |
UV Resistance | Yes, declared |
Weather Resistance | Yes, declared |
Anti-Vibration Properties | Reduces vibration transmission |
Ability to Secure to Ground | Yes |
Water Drainage Holes | Yes |
Number of Bases in Set | 2 pcs |
Mounting Screws | 4 pcs |
Spirit Levels Included | Yes |
Set Weight | 5.56 kg |
Applications
Anti-vibration bases SXH450-B are used for mounting and supporting:
- outdoor units of air conditioners;
- heat pumps;
- condensing units;
- chillers;
- pipelines and technical installations;
- ventilation ducts;
- support structures for cable trays.
The selection of bases should always be adjusted to the load, placement of mounting points, type of substrate, and the requirements of the supported installation.
Installation and Selection of SXH450-B Bases
Before installation, verify the weight of the device, the spacing of mounting points, and the permissible load of the set.
The maximum load of 280 kg applies to the entire set of two bases, not a single support. When selecting, consider the actual load distribution and the operating conditions of the installation.
Aluminium mounting rails allow for the adjustment of the position of mounts to the device's construction. The bases can also be secured to a suitably prepared substrate using appropriately selected anchoring elements.
The included spirit levels are intended for self-installation. Before use, adjust them on a verified, horizontal surface, and then use them when setting up the supports at the installation site.
Drainage holes assist in water removal from under the bases, which is particularly useful for outdoor installation.
Set Contents
The offer includes:
- 2 anti-vibration rubber bases, 450 mm long;
- 2 integrated aluminium mounting rails;
- 4 mounting screws;
- spirit levels for self-installation;
- mounting elements shown in the complete set photos.
The price is for one set – 2 anti-vibration bases.
Why Choose SXH450-B Bases?
SXH450-B bases stand out with their slim design, aluminium mounting system, and practical solutions for outdoor installation, such as water drainage holes and the ability to anchor to the ground. The declared load capacity of 280 kg per set, the anti-vibration properties of SBR rubber, and the included spirit levels make it a functional choice for professional installers of air conditioning, heat pumps, and refrigeration equipment.