External Condensate Pump MD-WPH-66 – 40 l/h, 20 m
The MD-WPH-66 condensate pump is designed for removing condensate water generated during the operation of air conditioners and refrigeration equipment. It enables the discharge of condensate in systems where the configuration of the drainage path does not allow for the use of traditional gravity drainage.
The MD-WPH-66 model features a maximum capacity of 40 l/h and a lifting height of up to 20 m. This makes it suitable for installations requiring the transport of condensate to greater heights. However, when designing the system, the actual hydraulic characteristics of the pump should be considered, as performance varies depending on the lifting height and system resistance.
An important advantage of the device is its low noise level of 19 dB(A) from a distance of 1 m. The pump has a self-priming function, overheating protection, and a built-in safety switch. Electronics embedded in resin provide additional protection for electronic components. The aesthetic casing allows the device to be integrated into air conditioning installations requiring external condensate pump mounting.
Main Advantages
- Maximum capacity 40 l/h – allows for the discharge of condensate from air conditioning and refrigeration systems, provided it is correctly matched to the amount of condensate generated.
- Lifting height up to 20 m – enables planning for condensate discharge to significant heights, taking flow characteristics into account.
- Quiet operation – 19 dB(A) – low declared noise level, measured at a distance of 1 m.
- Self-priming function – aids in drawing condensate into the pump and increases the device's application possibilities.
- Overheating protection – provides additional protection for the pump during operation.
- Built-in safety switch – serves as a protective element for the device.
- Electronics embedded in resin – structural protection for electronic components.
- Compact, aesthetic casing – facilitates the inclusion of the pump in installations with limited mounting space.
Technical Specification
Parameter | Value |
|---|
Model | MD-WPH-66 |
Device Type | External Condensate Pump |
Maximum Capacity | 40 l/h |
Maximum Lifting Height | 20 m |
Noise Level | 19 dB(A) |
Noise Measurement Distance | 1 m |
Supply Voltage | 230 V |
Supply Frequency | 50/60 Hz |
Self-Priming Function | Yes |
Overheating Protection | Yes |
Safety Switch | Built-in |
Electronics Protection | Electronics embedded in resin |
Construction | External, compact casing |
Performance and Operating Conditions
Performance Parameter | Value |
|---|
Maximum Condensate Flow | 40 l/h |
Maximum Lifting Height | 20 m |
Declared Noise Level | 19 dB(A) from 1 m |
Power Supply | 230 V, 50/60 Hz |
Important for Selection: the maximum flow of 40 l/h and maximum lifting height of 20 m are two separate limiting parameters. They do not imply that the pump achieves a flow of 40 l/h at a lifting height of 20 m.
The actual performance at a given operating point should be determined based on the flow characteristics as a function of lifting height and system resistance. Detailed performance measurement conditions require confirmation in the technical documentation.
Application of MD-WPH-66 Pump
The pump is intended for condensate discharge in installations such as:
- Wall-mounted air conditioners.
- Cassette air conditioners.
- Refrigeration installations and equipment.
- Installations without the possibility of gravity drainage.
- Systems requiring condensate lifting to greater heights.
The MD-WPH-66 model can be used in solutions requiring an external condensate pump. Before installation, it is necessary to verify the required capacity, lifting height, drainage path, and specific installation requirements.
Why Choose the MD-WPH-66 Condensate Pump?
The MD-WPH-66 combines a maximum flow of 40 l/h with a lifting height of up to 20 m and a low declared noise level. These parameters make it an attractive solution for installers seeking an external pump for condensate discharge.
The self-priming function, overheating protection, and safety switch complement the device's user features. Its compact design allows for consideration in both new installations and during the modernisation of existing condensate discharge systems.
This model is particularly worth considering when small construction dimensions, noise reduction, and the ability to lift condensate to greater heights are important.