Air Conditioner Wall Brackets GFK450 – 6 pcs with Obtuse Angle, 450 mm

Air Conditioner Wall Brackets GFK450 – 6 pcs with Obtuse Angle, 450 mm

Wall Brackets GFK450 with Obtuse Angle – Set of 6 Pieces are foldable support structures with a cross mounting beam, designed for installing external air conditioner units on building walls.

Each bracket of this type consists of a horizontal beam and two foldable arms. The beam, 700 mm in length, allows for adjustment of the arm spacing after mounting. The horizontal part of the arm is 450 mm long, and the vertical part is 300 mm.

The structure is powder-coated, providing protection for the metal surface elements. The equipment described for the GFK450 model includes a beam with a level, mounting screws, spacer screws for adjustment, and rubber anti-vibration pads.

The offered variant has a geometric deviation of the arms. The angle between the vertical and horizontal parts is slightly greater than 90°. According to the offer description, this requires adjustment using spacer screws from the wall side.

The set of six pieces may be an attractive offer for installation and service companies that have the opportunity to check the geometry of each structure before use.

Key Features and Benefits

• Cross Beam 700 mm – allows for adjustment of arm spacing and adaptation of support points to the device.
• Horizontal Arms 450 mm – facilitate the selection of the bracket to the dimensions of the external unit.
• Foldable Structure – improves transport and storage.
• Spacer Screws – allow for adjustment of the distance of the arms from the wall and correction of their setting.
• Level in Mounting Beam – facilitates level control during beam mounting.
• Powder Coating – provides surface protection against corrosion.
• Set of 6 Pieces – allows ordering a larger number of identical brackets within one offer.

Technical Specification

Application

The GFK450 brackets are structures intended for wall-mounted installation of external air conditioner units.

The offered variant with arm angle deviation requires individual assessment of suitability for the planned installation, particularly checking the geometry, load-bearing capacity, wall mounting, and correct device support.

The product should be used to support the external unit only after confirming that the structure meets all installation requirements after adjustment.

Set Contents

The offer includes 6 pieces of GFK450 bracket with obtuse angle.

The equipment of a single GFK450 model, according to the provided description, includes:

• cross beam with level;
• two foldable arms;
• mounting screws;
• spacer screws for adjustment;
• rubber anti-vibration pads.

Important Information – Product with Defect

The brackets have a geometric defect where the arms, when unfolded, form a slightly obtuse angle instead of a right angle.

According to the product description, adjustment is foreseen using spacer screws from the wall side.

Before installation, it is necessary to:

• Check the geometry and possibility of correct setting of each bracket.
• Verify proper support and levelling of the device.
• Select wall fixings and installation conditions.
• Confirm the permissible load of the structure in such a variant.

If correct setting cannot be achieved or the safety of the structure cannot be confirmed, the bracket should not be used to support the external unit.

Why Consider This Set?

The set of six GFK450 brackets represents a distinct commercial variant for buyers aware of the existing geometric defect. It allows the purchase of structures with known dimensions, adjustable arms, and mounting equipment as described in the offer.

Before purchasing, review the information about the obtuse angle and ensure that this variant is suitable for the intended application.