Oil reservoir BLR/VOR-12038 (volume 12l)

Test pressure

48bar

Connection Size - Outlet

3/8 "SAE Rotalock

Dimensions

D ф220mm, L 345mm, S1 100mm, S2 155mm, L1 320mm

Connection size - inlet

3/8 "SAE Rotalock

Volume

12l

Working pressure

33bar

Connection size - check valve

3/8 ”SAE sight glass

Permissible temperature

-10 ° C to -130 ° C

The 12-liter BLR / VOR-12038 oil tank is a storage tank to which the oil is drained from the oil separator and then cooled down, it is forced back into the compressor by the oil level regulator. The oil tank has 2 sight glasses, which enable the oil level in the storage tank to be checked. In the oil tank, all the refrigerant that has been trapped in it evaporates. The choice of oil tank size depends on the number of compressors connected, the amount of oil in the compressor and the operating conditions. The oil reservoir should be installed at the same level or higher than the oil level regulators. Each oil reservoir should be equipped with a heating element. When the compressor is at a standstill, the heater should be on to prevent refrigerant from migrating into the oil tank.

All registered trademarks and trademarks are the property of their respective owners.

Proper names are provided for information purposes only and are used to compare the products.

Product Oil reservoir BLR/VOR-12038 (volume 12l) belongs to the category Pressure products and subcategories Oil receivers

Pressure products are essential components of refrigeration and air conditioning systems. Filter driers protect all parts of the refrigeration and air conditioning system against contamination and moisture (Remember to change the filter driers regularly!). Other: oil separators and filters, liquid accumulators, vessels and vibration absorbers on the pressure system enable proper circulation of cooling liquid, cooling gas and oil, which ensures long and trouble-free operation of the entire system. We offer a wide range of parts for the construction, maintenance and service of refrigeration and air conditioning systems. We invite you to contact manufacturers of equipment and installations, wholesalers, shops and services: refrigeration and air conditioning.

Oil tanks of the BLR / VOR series are storage tanks, constituting an important element of the oil line of the cooling system, installed with oil separators. These tanks receive the oil from the oil separator and return it to the compressor via the oil level regulator. Oil reservoirs prevent fluid circulation to the oil level regulators and oil flow changes caused by compressors. Oil tanks should be installed at a level higher than the compressor housing. BLR / VOR series oil tanks are equipped with 2 sight glasses that allow you to check the oil level in the tank. If the oil level is lower than the lower sight glass, add oil. Oil visible in the top sight glass may indicate no gas at the top of the tank, which may result in too little pressure to force oil into the compressor. The selection of the oil tank size depends on the amount of oil in a given system, and its volume should be 30% of the oil volume in the compressors. In our offer you will find oil tanks with a capacity of 6 to 12 liters.