Oil separator BLR/A-W559011 (1 3/8”ODF)

Test pressure

48bar

Dimensions

A 102mm, B 524mm, C 48mm

Connection

1 3/8 ”ODF, 35mm

Working pressure

33bar

Permissible temperature

min. -10 ° C, max -130 ° C

BLR / A-W559011 oil separator with 1 3/8 ”connection adapted for soldering. Made of high-quality materials (float, oil filter, separator and stainless steel valve pin; oil return pipe and float valve are made of brass material), the hermetic oil separator captures the oil from the refrigerant and returns it to the crankcase. The use of an oil separator is recommended in refrigeration and air conditioning systems in order to prevent compressor breakdowns caused by lack of lubrication of the moving parts of the compressor and to suppress pulsations on the high pressure side of the system. The oil separator in the cooling system should be installed vertically between the compressor and condenser.

All registered trademarks and trademarks are the property of their respective owners.

Proper names are provided for information purposes only and are used to compare the products.

Product Oil separator BLR/A-W559011 (1 3/8”ODF) belongs to the category Pressure products and subcategories Oil separators

Pressure products are essential components of refrigeration and air conditioning systems. Filter driers protect all parts of the refrigeration and air conditioning system against contamination and moisture (Remember to change the filter driers regularly!). Other: oil separators and filters, liquid accumulators, vessels and vibration absorbers on the pressure system enable proper circulation of cooling liquid, cooling gas and oil, which ensures long and trouble-free operation of the entire system. We offer a wide range of parts for the construction, maintenance and service of refrigeration and air conditioning systems. We invite you to contact manufacturers of equipment and installations, wholesalers, shops and services: refrigeration and air conditioning.

Oil separator, also known as a hermetic oil separator, is a refrigeration system component that traps oil from the refrigerant and returns it to the crankcase. Correct installation of the oil separator between the compressor and the condenser enables the oil to be separated from the medium, thanks to which the oil separator prevents compressor failures caused by lack of lubrication of the moving parts of the compressor and suppresses pulsations on the high pressure side of the system. High-quality materials were used for the production of BLR / A-W series steam traps. Components such as the float, oil filter, separator and valve pin are made of stainless steel. The oil return pipe and the float valve are made of brass material. In our offer you will find both oil separators with a connection adapted to twisting and oil separators with a soldering connection.